SALE PRODUCTS
1000 pcs of staples (for INGCO HSG1404 / HSG1405) Size: 12mm width: 1.2mm Packed by color box
Item type: Stationary accessories
Ingco stapler pins
1000 pins
Size: 10*11.3*1.12 mm
Model: STS0210
AIR STAPLER APS06131-3 INGCO 6-13MM 100PCS
Model Number: PRO-PS8016V2
Leg Lengths: 3-16 mm
Inner Crown: 11.40 mm
Outer Crown: 12.90 mm Wire Dimensions: 0.65 x 0.95 mm
ANGLE GRINDER AG003 MAKUTE 7″ 2400W
Model: AG003 Angle Grinder Rated Volatge: 220-240/110V~50/60Hz Rated Input Power: 2400W No Load Speed: 6000 r/min Disc Dia: 230mm G.W./N.W.: 23/21 KGS Packing: 59*40.5*26.5cm/4Pcs
Close
ANGLE GRINDER AG003 MAKUTE 9″ 2400W
- Rated Volatge: 220-240/110V
- Rated Frequency: 50/60Hz
- Rated Input Power:2400W
- No Load Speed: 6000r/min
- Disc dia: 230mm
- G.W./N.W.: 23/21 KGS
- Packing: 59*40.5*26.5cm/4Pcs
ANGLE GRINDER AG005 MAKUTE 5″ 1400W
Model: AG005 Angle Grinder Rated Volatge: 220-240/110V~50/60Hz Rated Input Power: 1400W No Load Speed: 10800 r/min Disc Dia: 115mm G.W./N.W.: 26/24 KGS Packing: 65*41*26cm/10Pcs
SPECIAL OFFER
Close
MAF Jetcut Saw 18″/450mm 7TPI
- length:450mm/18"
- Thickness:0.9mm, 7TPI
- Heat treatment
- Packed by paper card
MAF Magnetic Welding Holder Set
FEATURES:
- MAGNETIC - This magnetic welding holder is magnetic so it can hold workpieces at multiple angles while leaving your hands free to work more safely and efficiently.
- The CONVENIENT- compact design of magnetic holders makes them super convenient and portable to bring around in any work environment.
- USE FOR A VARIETY OF APPLICATIONS - Magnetic arrow holders can be used for welding, soldering, positioning, aligning, and lifting ferrous materials, like steel sheets, profiles, and pipes
- Usage: Being used as holder and positioner in welding, soldering, marking off, pipe installation.
- Size: 305*250*20mm
-
- 6pcs Magnets
- Gift 25LBS*1
Close
MAF 25 LBS Magnetic Welding Holder BLM-25
- Powerful Magnets Embedded in the Welding Holder Allow this Magnet to Hold up to 25 Lbs
- 25 Lbs Holding Power when Holding Materials at 90, 45, and 135 Degrees
- Frees up your Hands to Make your Tasks Safer
- Overall dimensions: 4.75" x 3.25" x 5/8"
MAF 50 LBS Magnetic Welding Holder BLM-50
- Magnetic Welding Holder, TIG Welding Tool for Holding Up Metal Parts. Up to Maximum 50 LB Holding Power. Welding Clamp for All Welders
- Powerful Magnets in Compact Design Allow You to Hold a Whole Range of Items, Competitive Price and Fast Delivery. For all Kinds of Welding
- High Gloss Enamel End Plates Applicable for all Kinds of Welding, Gas Tungsten Arc Welding (TIG ), Gas Metal Arc Welding ( MIG ), Shielded Metal ArcWelding ( Stick ), Cored Arc Welding ( Flux ), Energy Beam Welding (EBW), Atomic Hydrogen Welding (AHW), Gas Tungsten-Arc Welding and Plasma Arc Welding
- These Tools can Also be Used for All kinds of Holdings, Alignments, Markings. Apply for all Magnetic Materials. Holds Material at 45, 90, and 135 Degrees for Easy Welding or Soldering
- Frees up Your Hands So You Can Concentrate on Your Work. Made under ISO 9001 Quality Systems and Money Back Guaranteed.
MAF 75 LBS Magnetic Welding Holder BLM-75
- Magnetic Welding Holder, TIG Welding Tool for Holding Up Metal Parts. Up to Maximum 75 LB Holding Power. Welding Clamp for All Welders
- Powerful Magnets, Compact Design, Competitive Price and Fast Delivery. For all Kinds of Weldings
- Applicable for all Kinds of Welding, Gas Tungsten Arc Welding (TIG ), Gas Metal Arc Welding ( MIG ), Shielded Metal ArcWelding ( Stick ), Cored Arc Welding ( Flux ), Energy Beam Welding (EBW), Atomic Hydrogen Welding (AHW), Gas Tungsten-Arc Welding and Plasma Arc Welding
- These Tools can Also be Used for All kinds of Holdings, Alignments, Markings. Apply for all Magnetic Materials
- Made under ISO 9001 Quality Systems and Money Back Guaranteed.
MAF 350W High Speed Mini Bench Electric Drill Machine – with 5 Level Speed Drill Setting – Chuck size 13 mm – 2 Inch depth- MAF Bench Press Drill
- 350W High-Speed Mini Bench Electric Drill Machine
- with 5 Level Speed Drill Setting
- Chuck size 13 mm
- 2-inch depth
MOST POPULAR
Cum cubilia ac fringilla lorem
quis himenaeos velit.
quis himenaeos velit.
FOR TRAVELERS
Close
MAF Jetcut Saw 18″/450mm 7TPI
- length:450mm/18"
- Thickness:0.9mm, 7TPI
- Heat treatment
- Packed by paper card
MAF Magnetic Welding Holder Set
FEATURES:
- MAGNETIC - This magnetic welding holder is magnetic so it can hold workpieces at multiple angles while leaving your hands free to work more safely and efficiently.
- The CONVENIENT- compact design of magnetic holders makes them super convenient and portable to bring around in any work environment.
- USE FOR A VARIETY OF APPLICATIONS - Magnetic arrow holders can be used for welding, soldering, positioning, aligning, and lifting ferrous materials, like steel sheets, profiles, and pipes
- Usage: Being used as holder and positioner in welding, soldering, marking off, pipe installation.
- Size: 305*250*20mm
-
- 6pcs Magnets
- Gift 25LBS*1
Close
MAF 25 LBS Magnetic Welding Holder BLM-25
- Powerful Magnets Embedded in the Welding Holder Allow this Magnet to Hold up to 25 Lbs
- 25 Lbs Holding Power when Holding Materials at 90, 45, and 135 Degrees
- Frees up your Hands to Make your Tasks Safer
- Overall dimensions: 4.75" x 3.25" x 5/8"
MAF 50 LBS Magnetic Welding Holder BLM-50
- Magnetic Welding Holder, TIG Welding Tool for Holding Up Metal Parts. Up to Maximum 50 LB Holding Power. Welding Clamp for All Welders
- Powerful Magnets in Compact Design Allow You to Hold a Whole Range of Items, Competitive Price and Fast Delivery. For all Kinds of Welding
- High Gloss Enamel End Plates Applicable for all Kinds of Welding, Gas Tungsten Arc Welding (TIG ), Gas Metal Arc Welding ( MIG ), Shielded Metal ArcWelding ( Stick ), Cored Arc Welding ( Flux ), Energy Beam Welding (EBW), Atomic Hydrogen Welding (AHW), Gas Tungsten-Arc Welding and Plasma Arc Welding
- These Tools can Also be Used for All kinds of Holdings, Alignments, Markings. Apply for all Magnetic Materials. Holds Material at 45, 90, and 135 Degrees for Easy Welding or Soldering
- Frees up Your Hands So You Can Concentrate on Your Work. Made under ISO 9001 Quality Systems and Money Back Guaranteed.
MAF 75 LBS Magnetic Welding Holder BLM-75
- Magnetic Welding Holder, TIG Welding Tool for Holding Up Metal Parts. Up to Maximum 75 LB Holding Power. Welding Clamp for All Welders
- Powerful Magnets, Compact Design, Competitive Price and Fast Delivery. For all Kinds of Weldings
- Applicable for all Kinds of Welding, Gas Tungsten Arc Welding (TIG ), Gas Metal Arc Welding ( MIG ), Shielded Metal ArcWelding ( Stick ), Cored Arc Welding ( Flux ), Energy Beam Welding (EBW), Atomic Hydrogen Welding (AHW), Gas Tungsten-Arc Welding and Plasma Arc Welding
- These Tools can Also be Used for All kinds of Holdings, Alignments, Markings. Apply for all Magnetic Materials
- Made under ISO 9001 Quality Systems and Money Back Guaranteed.
MAF 350W High Speed Mini Bench Electric Drill Machine – with 5 Level Speed Drill Setting – Chuck size 13 mm – 2 Inch depth- MAF Bench Press Drill
- 350W High-Speed Mini Bench Electric Drill Machine
- with 5 Level Speed Drill Setting
- Chuck size 13 mm
- 2-inch depth
SALE PRODUCTS
1000 pcs of staples (for INGCO HSG1404 / HSG1405) Size: 12mm width: 1.2mm Packed by color box
Item type: Stationary accessories
Ingco stapler pins
1000 pins
Size: 10*11.3*1.12 mm
Model: STS0210
AIR STAPLER APS06131-3 INGCO 6-13MM 100PCS
Model Number: PRO-PS8016V2
Leg Lengths: 3-16 mm
Inner Crown: 11.40 mm
Outer Crown: 12.90 mm Wire Dimensions: 0.65 x 0.95 mm
ANGLE GRINDER AG003 MAKUTE 7″ 2400W
Model: AG003 Angle Grinder Rated Volatge: 220-240/110V~50/60Hz Rated Input Power: 2400W No Load Speed: 6000 r/min Disc Dia: 230mm G.W./N.W.: 23/21 KGS Packing: 59*40.5*26.5cm/4Pcs
Close
ANGLE GRINDER AG003 MAKUTE 9″ 2400W
- Rated Volatge: 220-240/110V
- Rated Frequency: 50/60Hz
- Rated Input Power:2400W
- No Load Speed: 6000r/min
- Disc dia: 230mm
- G.W./N.W.: 23/21 KGS
- Packing: 59*40.5*26.5cm/4Pcs
ANGLE GRINDER AG005 MAKUTE 5″ 1400W
Model: AG005 Angle Grinder Rated Volatge: 220-240/110V~50/60Hz Rated Input Power: 1400W No Load Speed: 10800 r/min Disc Dia: 115mm G.W./N.W.: 26/24 KGS Packing: 65*41*26cm/10Pcs
FAVORITE GARDEN
Many desktop publishing and
web page editors now.
web page editors now.
ALL FOR GARDEN
SPECIAL OFFER
1000 pcs of staples (for INGCO HSG1404 / HSG1405) Size: 12mm width: 1.2mm Packed by color box
Item type: Stationary accessories
Ingco stapler pins
1000 pins
Size: 10*11.3*1.12 mm
Model: STS0210
AIR STAPLER APS06131-3 INGCO 6-13MM 100PCS
Model Number: PRO-PS8016V2
Leg Lengths: 3-16 mm
Inner Crown: 11.40 mm
Outer Crown: 12.90 mm Wire Dimensions: 0.65 x 0.95 mm
ANGLE GRINDER AG003 MAKUTE 7″ 2400W
Model: AG003 Angle Grinder Rated Volatge: 220-240/110V~50/60Hz Rated Input Power: 2400W No Load Speed: 6000 r/min Disc Dia: 230mm G.W./N.W.: 23/21 KGS Packing: 59*40.5*26.5cm/4Pcs
Close
ANGLE GRINDER AG003 MAKUTE 9″ 2400W
- Rated Volatge: 220-240/110V
- Rated Frequency: 50/60Hz
- Rated Input Power:2400W
- No Load Speed: 6000r/min
- Disc dia: 230mm
- G.W./N.W.: 23/21 KGS
- Packing: 59*40.5*26.5cm/4Pcs
ANGLE GRINDER AG005 MAKUTE 5″ 1400W
Model: AG005 Angle Grinder Rated Volatge: 220-240/110V~50/60Hz Rated Input Power: 1400W No Load Speed: 10800 r/min Disc Dia: 115mm G.W./N.W.: 26/24 KGS Packing: 65*41*26cm/10Pcs
Close
ANGLE GRINDER AG016 MAKUTE 4″ 850W
4" ANGLE GRINDER Rated Voltage:220-
240V~50/60HZ Input Power:780W
No-load speed:11000r/min
Max disc diameter:100/115mm
Close
ANGLE GRINDER AG240082 INGCO 7″ 2400W
Brand : Ingco Ingco Item No : AG240082
Voltage : 220-240V~50/60Hz Input power : 2400W No-load speed : 8000rpm Disc diameter : 180mm Spindle thread : M14 With 1pcs auxiliary handle With 1set carbon brushes Packed by color box
ANGLE GRINDER AG7106-2 INGCO 4″ 710W
Brand : Ingco Ingco Item No : AG7106-2
Voltage : 220-240V~50/60Hz Input Power : 710W No-load speed : 11000rpm Disc Diameter : 100mm Spindle Thread : M10 Features : With 1pcs auxiliary handle,Packed by color box